Showing posts with label replacement parts. Show all posts
Showing posts with label replacement parts. Show all posts

10/16/2011

Moen 104421 Cartridge Puller, for 1200, 1222 & 1225 single handle cartridges Review

Moen 104421 Cartridge Puller, for 1200, 1222 & 1225 single handle cartridges
Average Reviews:

(More customer reviews)
A bit pricey for something I doubt we'll ever need again -- or at least not for another 5-10 years by which time it will be buried so deep in the shop I'll never find it.It cost as much as the replacement cartridge.

Without it, we were unsuccessful at pulling the cartridge after 20 minutes.With it, the cartridge popped out nearly instantly.Huge difference!

Click Here to see more reviews about: Moen 104421 Cartridge Puller, for 1200, 1222 and 1225 single handle cartridges

Product Description:
Specialty - Plumbing Tools & BrushesType: Cartridge Puller

Buy NowGet 59% OFF

Want to read more honest consumer review about Moen 104421 Cartridge Puller, for 1200, 1222 and 1225 single handle cartridges now ?

8/30/2011

Dew Cap Replacement (2pk) Review

Dew Cap Replacement
Average Reviews:

(More customer reviews)
I bought these, tested them on 5 gallon jugs and found they are not water tight. Though not advertised as water tight, I assumed so since they would typically be used on drinking water containers (i.e., "emergency water stash"). Since they are not water tight, then they aren't air tight and should not be used for long term potable water storage without the use of disinfectants (i.e., chlorine).

Click Here to see more reviews about: Dew Cap Replacement (2pk)

Product Description:
This simple but effective item is the heart and soul of keeping your purified water contained. This 55mm crown or snap-on light blue cap is the industry standard cap for 3 and 5 gallon water bottles. Its standard intergrated cup seals both the interior and exterior neck of the bottle. Release tab on the outer edge makes removing the cap a breeze. The cap fits both glass and plastic 3 and 5 gallon bottles with a "crown" or "snap-on" top. They are sold two per pack. For reference, outside dimension for the bottle opening would be 2.165 inches. If you currently have a snap cap for the bottle the outside dimension of that cap is about 2.75 inches. ..... Look for this product in a 12 pack for discount pricing.

Buy Now

Want to read more honest consumer review about Dew Cap Replacement (2pk) now ?

6/23/2011

Everpure EV9282-01 H-1200 Replacement Cartridge, 2 Pack Review

Everpure EV9282-01 H-1200 Replacement Cartridge, 2 Pack
Average Reviews:

(More customer reviews)
Anmazon lists the price for this item at $156.62 for the pair.But when you get onto the ApplianceZone website the price is $184.69.Someone needs to get their act together.

Click Here to see more reviews about: Everpure EV9282-01 H-1200 Replacement Cartridge, 2 Pack

Product Description:
Quick-change water filter cartidge set for the Everpure H-1200 Drinking Water System. Now Everpure's commercial quality, the overwhelming choice for water filtration in restaraunts, is also available for your home drinking water. Features bacteriostatic and limescale control with KDF media and dual stage filtration to ensure maximum reduction of contaminants.

Buy Now

Want to read more honest consumer review about Everpure EV9282-01 H-1200 Replacement Cartridge, 2 Pack now ?

6/21/2011

Intex 1,500 gph Above Ground Pool Replacement Filter Pump Only Review

Intex 1,500 gph Above Ground Pool Replacement Filter Pump Only
Average Reviews:

(More customer reviews)
First of all, this "toy" does not exhibit a "fun" value, nor does it have an "educational" value, but I couldn't post this review without giving it a star rating...LOL.

I have this pump that came with my easy-set, metal-frame pool.It works great, but not without other regular maintanence tasks that is required to keep your pool clean and healthy.Sounds like the previous reviewers expect the filter to work on its own, continuously, like with an in-ground pool.This is not the case.

As for the one previous reviewer that says it doesn't filter sediment, that's because you need to use the vacuum.The vacuum (at least with my pool) had a separate canister, whereby you insert a tighly-woven mesh bag, and connect the hoses to the filter and vacuum the pool bottom.I do this every 2-3 days, depending on pool usage.Plus, it's very helpful to have a tub of clean water for pool users to rinse their feet before climbing the ladder to enter the pool.This had cut down the sediment problem immensely.

At any rate, after a thorough vacuuming of the pool bottom, I find that the mesh bag is loaded with sediment and other stuff.After vacuuming, I switch the vacuum canister with the skimmer piece and let the filter run 6-8 hours (overnight works well for me).

Another problem that may inhibit the filter's function for the previous reviewers is you cannot leave the filter connected to the pool hoses 24/7.The filter cartridge stays submerged and will eventually mold - greatly reducing the filtering rate and getting yucky water slowly filtering back into the pool when you do turn the filter pump on.This happened with another friend of mine and once he started disconnecting hoses and changing the canisters more frequently, the problem stopped.

You need to close the plunger valves, disconnect the hose from the filter (I leave the other end attached to the plungers)and open the side valve on the filter to fully drain the water. From there, I check the status of the filter cartridge -- sometimes it can last 2-3 filtering runs (when I leave it on over night) and other times, it needs immediate replacing.During heavy usage months, I go through a least 1-2 cartridges a week.

Also, by disconnecting the hose from the filter itself, you can check the outside connection point.Sometimes I find grass blades (that slithered through the skimmer) trapped and blocking the intake point to the filter.However, this is rare.I also put chlorine shock through my skimmer, while the filter is on, once a week.This helps to keep the filter mechanisms cleaned, too.

Having a pool is lots of fun for my family and their friends, that come over...but, with the fun, comes responsibility.Maintaining proper PH/chlorine levels is an absolute must.High PH reading with not only affect the clarity of your water and the comfort of your swimmers, but the acidic reading (PH 7.8 and higher) will wear out the filter as the acid water goes through.

Invest in a 3-way pool kit (about $10) and check the PH and chlorine daily.This will help prolong the life of your pool and the filter.Once the pool is stabilized (the PH and Chlorine levels are harmonized), this routine maintanence doesn't take long.Frequent and proper filtering, vacuuming, chlorine (some people use the floating duck to slowly dissolve chlorine daily...for me, I do a weekly shock treatment instead without problems) will keep everyone happy.

If you are not diligent with the pool upkeep, then you will have problems with algae, etc... and will end up wasting water from having to drain it and start over.Good luck!

Click Here to see more reviews about: Intex 1,500 gph Above Ground Pool Replacement Filter Pump Only

Product Description:
Replacement pump unit only w/ Starter Filter Cartridge. New improved 2008 model. Package includes filter cartridge & installation manual. Easy installation - Just hook-up hoses and plug-in. Double insulated pump. Air release valve for air trapped inside filter chamber. Sediment flush valve at bottom of filter chamber. UL/CSA listed. Fits all Intex Easy Set, Frame Set or Oval / Ellipse 18' Pools or Equivalent

Buy Now

Want to read more honest consumer review about Intex 1,500 gph Above Ground Pool Replacement Filter Pump Only now ?

6/04/2011

Filmtec Membranes TW30-1812-50 Review

Filmtec Membranes TW30-1812-50
Average Reviews:

(More customer reviews)
The little white capillary flow resistor, which needs to match and be replaced same time with the ro membrane filter wasn't included w/ the membrane filter. I had to buy one, which increased the price of the membrane. The whirlpool membrane includes the capillary flow resistor.So, I'll probably stick with the Whirlpool brand at Lowe's.

Click Here to see more reviews about: Filmtec Membranes TW30-1812-50

Product Description:
This item DOES NOT FIT Watts Premier WP-5 RO System

Buy Now

Want to read more honest consumer review about Filmtec Membranes TW30-1812-50 now ?