5/03/2012

Aquabot Turbo T2, Robotic In-ground Pool Cleaner Review

Aquabot Turbo T2, Robotic In-ground Pool Cleaner
Average Reviews:

(More customer reviews)
Not only does the Aquabot keep the bottom, sides, and steps of the pool clean, it's fun to watch!It also removed the black scuff marks left by the previous owners.After 4 hours of operation the metal box housing the power supply gets very warm, but this is probably normal.I see one area for improvement and this would be to have a swivel type of attachment where the cord attaches to the vacuum.The cord does get very wrapped and tangled around itself, so I have to untangle it or reverse the cleaning pattern each day.However, the time it takes to do that is far less than the time it would take to vacuum and brush down the pool manually.I highly recommend the Aquabot over the smaller automatic cleaners because it's bigger, faster, has its own power supply that you just plug into an outlet, and it does a thorough cleaning job.

Click Here to see more reviews about: Aquabot Turbo T2, Robotic In-ground Pool Cleaner

Product Description:
Clean your pool the most efficient way possible and save time and money, while reducing environmental impact with the Aquabot Turbo T2 Robotic Inground Pool Cleaner. The self-contained T2 pool cleaner is equipped with an internal, microprocessor-guided drive motor and directional clutch that directs the T2 to clean any pool up to 50 feet long in just one hour. The T2 cleans pools as much as five hours faster than other cleaners and methods, without the hassle of hoses, pumps, and vacuum poles. Simply turn the T2 on and drop it in the water. An hour later your pool will be ready for swimming.
The T2 uses a rotating quad brush system with a patented flex-flap design to scrub waterline build-up and break up larger debris on the pools surface area, while the patented power-washing jets flush sand, silt, algae, and bacteria out from corners, creases, seams, and surface pores of the pool that the brushes can't reach. A powerful built-in pump motor vacuums in and circulates 5,000 gallons of water per hour, trapping all dirt, debris, algae, and micro-organisms inside the 19-quart internal reusable filter bag. The filter cleans out micro-organisms of up to two microns as well as leaves, hair, sand, and other dirt to ensure the healthiest swimming environment possible. The vacuum ports are located at the front and rear of the unit to avoid clogging and to ensure that all debris are collected from even the farthest reaches of the pool without hoses, and the extra-wide non-marring wheels cover all surfaces of the pool.
The T2 cleans in-ground pools of any shape and up to 50 feet long in just one hour. Pumping 5,000 gallons of water an hour without the pool's filter or booster pumps, the T2 increases water circulation and reduces your pool filter's operation time by as much as 25 percent. Increased water circulation also decreases the use of heat pumps or solar blankets and reduces chemical consumption by as much as 30 percent. Overall, the T2 can save you as much as 50 percent in maintenance costs, while greatly reducing environmental impact. Ease of use features on the Turbo T cleaner include: the E-Z Swivel Device to ensure a tangle-free power cable; a reset button to protect against out of water or premature operation; auto-shut off; and a customizable cleaning cycle for up to seven hours, or automatic operation with existing or auto-control pool equipment. The Turbo T's cleaner, cord, and power supply are ETL listed to UL Standards--the highest safety and reliability certification in the industry.
The Turbo T2 has a suggested run time of just one hour but can be customized for up to a seven-hour cleaning cycle. The self-contained reusable filter has a 19-quart capacity, and the device filters up to 5,000 gallons of water an hour. The pump motor is individually sealed and brushless oil-filled for lubrication and cooling and is also water-cooled. The drive motor is individually sealed and water-cooled. The power cord is 61 feet long, self-buoyant and constructed of durable, thermoplastic rubber that won't be degraded by chlorine. The estimated operating cost of the TurboT2 is 10 cents per cleaning cycle depending on local energy costs. The unit's energy needs are: 115 Volts / 60 Hz, 24 V and 140 Watts.
Specifications:

    For pools up to 50 feet long of any shape or surface
    Suggested cleaning time: One hour
    Auto-shut off
    Customization
    Operating protection reset button
    Self-contained reusable 19-quart capacity filter
    Filter removes all debris types down to two microns
    Filtration quantity: 5,000 gallons per hour
    Pump motor: Individually sealed, brushless oil-filled for lubrication and cooling, plus water-cooled
    Drive motor: Individually sealed, oil-free water-cooled
    61-foot cord is self-buoyant durable thermoplastic rubber
    StayCool all-weather resistant power supply
    Operating cost: Estimated less than 5 cents per cleaning cycle
    Wattage: 140 Watts
    Voltage: 115 V / 60 Hz, 24 V at cleaner
    Cleaner, cord, and power supply are ETL listed to UL Standards
    Dimensions: 16 x 15 x 13 inches
    Weight: 16.75 pounds

Manufacturer Warranty
Four-years/300 Cycles prorated


Buy Now

Want to read more honest consumer review about Aquabot Turbo T2, Robotic In-ground Pool Cleaner now ?

No comments:

Post a Comment