Average Reviews:
(More customer reviews)Product was relatively easy to install but I downloaded better instructions from an internet website than were included with the product. Also, my furnace had a 24v tap so the electrical hookup was easy.
Some notes:
1) I did not buy the installation kit because I did not need the sail switch (because of the 24v tap) and most of the cost of the kit is for this switch. It is much cheaper to buy only the pieces you need - they are carried at most hardware & building supply stores. Plan on spending about $30 on parts.
2) The template for cutting the humidifier hole into the duct is the instruction sheet. If I had not read this on another review, I would not have found it. Shame on Honeywell for not telling you this in the instructions!
3) Use the saddle valve to regulate the water flow to the unit, otherwise you will waste a lot of water. This was the only thing I disliked about it but I think this is the case with all new designs.
4) Instructions tell you that you can install the unit on either the supply (warm air) or return (cold air) duct. But most reviews I read from professionals recommend mounting the humidifier on the cold air return duct in case you have a water leak - will not ruin any of the furnace electronics or motor.
Overall I'm satisfied with this unit - will likely install one in both my kids houses.
Click Here to see more reviews about: Honeywell HE260A Higher Capacity Whole House Bypass Humidifier
Product Description:
This flow thru by pass whole house humidification unit is low maintenance, cost effective, and is simple to operate. This unit requires good access to a return duct and drain. The humidifier mounts on supply plenum or return. By pass carries air from supp
Get 26% OFF
Want to read more honest consumer review about Honeywell HE260A Higher Capacity Whole House Bypass Humidifier now ?
No comments:
Post a Comment